+38 067 827 49 23

Calls, Viber, Telegram, WhatsApp

Mon–Fri 9:00–18:00

Maize for grits: which hybrids to sow and how to grow grain for processing18 November 2026

Maize for grits: which hybrids to sow and how to grow grain for processing

Maize for grits is a separate market with its own grain requirements. Grits mills and producers of maize flour, flakes and snacks pay for vitreous, whole and clean grain, not just for tonnes. So the work starts not with sowing but with choosing the hybrid and talking to the buyer.

What grain is needed for grits

Grits yield depends on the share of hard, vitreous endosperm. Flint hybrids have the most of it, flint-dent hybrids slightly less. Dent grain is floury: during milling it breaks down into flour and gives little coarse grits.

What a processor usually checks:

  • grain type and vitreousness;
  • test weight, kernel size and uniformity;
  • share of broken and cracked kernels;
  • fusarium damage and mycotoxin content, since the grain goes for food use;
  • moisture and impurities.

Each mill has its own specifications. Ask for the raw-material requirements before sowing: both the hybrid and the drying regime depend on them.

Which hybrids to sow

Look for the grain type “flint” or “flint-dent” and the use “grits” in the hybrid description. In our catalogue the breeders list these hybrids as suitable for grits:

Flint grain dries down more slowly than dent grain. For grits it is therefore better to choose a slightly earlier maturity group than you normally sow for feed: the grain has time to mature and dry in the field and does not need harsh drying. All hybrids are in the maize seed section.

Growing tips

  • Sowing. Flint hybrids are usually more cold-tolerant at emergence, so they cope well with early sowing. Keep the plant density recommended by the breeder for your zone: in an overly dense crop the cobs are smaller and the grain is less uniform.
  • Nutrition. Sufficient nitrogen raises protein content and vitreousness; with a nitrogen deficit the grain turns out more floury. Do not forget zinc at the 3–8 leaf stage.
  • Weeds. Weed control is standard for maize: the field must be clean until the rows close.

Protecting the cob is the key for food-grade grain

Grits lots are most often rejected because of fusarium and mycotoxins. Pests open the door to infection: caterpillars of the European corn borer and the cotton bollworm bore into the cob, and the fungus settles on the damaged kernels. Therefore:

  • monitor moth flight and apply an insecticide at the start of larval hatching;
  • plan a fungicide on fields with a disease risk;
  • do not leave mature grain standing in the field for long: in a wet autumn fusarium builds up week by week.

You can calculate the whole programme for your area in the crop protection plan calculator.

Harvesting and drying

This is where quality already grown in the field is most easily lost.

  • Threshing. Set the combine to a gentle mode: excessive drum speed gives broken kernels and micro-cracks.
  • Drying. Use mild regimes and gradual cooling. Sharp heating and fast cooling cause internal stress cracks, and at the mill such grain crumbles into flour. Check the permissible temperature with your processor.
  • Storage. Keep the grits lot separate from feed maize and do not mix grain of different hybrids.

In short

  • Buyer requirements first, then the hybrid.
  • Grain type: flint or flint-dent; maturity group: slightly earlier than usual.
  • Protect the cob from corn borer, bollworm and fusarium.
  • Gentle threshing and mild drying keep the kernels whole.

Need help choosing a hybrid for grits or a protection programme? Call our manager and we will select options for your zone and your processor’s requirements.